Copy Your WebAssign-Integrated Course in LMS

Copy a WebAssign-integrated LMS course to copy all content and course settings in both LMS and WebAssign at the same time.

This feature is not available to everyone and cannot be used to copy another instructor's course. Alternatively, see Copy a WebAssign Course to a New LMS CourseCopy a WebAssign Course to a New LMS Course.

If this feature is not enabled for your institution, you will be asked to complete additional steps after copying your LMS course.

Note To request this feature, ask your Cengage representative to enable enhanced course copy.
  1. In LMS, create a new course.
  2. Copy content from a WebAssign-integrated course to your new LMS course.

    If you are manually selecting which content to copy, be sure to include links to WebAssign.

  3. In BlackboardĀ®, copy all course content to a new course using one of the following methods.
    • Copy an entire WebAssign-integrated Blackboard course.
    • Create a new Blackboard course and copy content from a WebAssign-integrated course into the new course.

    If you are manually selecting which content to copy, be sure to include links to WebAssign.

  4. After the task is complete, navigate to the copied content area in your new course.

    Your WebAssign links should all be listed, but they don't yet point to a WebAssign course.

  5. Click one of the WebAssign links.

    Your copied WebAssign course opens in a new tab.

    All dates in your new WebAssign course are inferred from the course start and end date.

Note If your course does not open, this feature is not enabled and you must complete these additional steps.
  1. Copy your WebAssign course.
    1. Select Copy from my existing WebAssign course if it is not already selected.
    2. Select the correct WebAssign course if it is not already selected.
    3. Enter the necessary information.

Review and adjust assignment dates and course settings as needed.